Foreword

Welcome to our Tutorial section. Here you will find guides on automated parameter-variation simulations for both FE and CFD analyses, all based exclusively on open-source tools. Each tutorial is recorded and published on YouTube, demonstrating the complete workflow, from geometry creation and simulation setup to automation and post-processing.

For every tutorial, the associated project files and a written version of the guide can be purchased through our Gumroad page. Each tutorial is available for 24,99€. If you would like to support our work, feel free to purchase them.

Automated FE analysis of an L-Bracket

Automated FE analysis of an L-bracket with varying thickness, leg length, and width, including an evaluation of stress versus volume and a Pareto-front assessment to identify designs that combine low stress with low volume.
Watch tutorial on YouTube
Buy tutorial on Gumroad

Automated CFD analysis of a NACA2412 airfoil

Automated CFD analysis of a NACA 2412 airfoil with varying angles of attack (AoA), including evaluation of the resulting lift coefficient.
Watch tutorial on YouTube
Buy tutorial on Gumroad

Automated CHT analysis of a heat sink geometry

Automated CHT analysis of a heat sink geometry with varying base plate thickness, fin width and fin number while maintaining a minimum gap distance, including evaluation of the resulting thermal resistance vs pressure drop.
Watch tutorial on YouTube
Buy tutorial on Gumroad